信息詳情
當前位置： 首頁 > 氣浮設備的工藝流程
氣浮設備的工藝流程
我公司是以生產、銷售、維護氣浮設備為一體的公司，近年來公司不斷發展技術力量，創(chuàng )新生產技術手段，生產的產品銷往全國各地，受到客戶的一致好評，讓大家了解一下氣浮設備的工藝流程：
氣浮設備的工作原理是在的壓力(0.35~0.45Mpa)下使適量空氣與部分回流水在溶氣罐內形成飽和溶氣載體，經釋放器驟然減壓而獲得大量微細氣泡，迅速粘附于水中流動顆粒、乳化油、澡類和經混凝反應的絮體上，造成絮體比重小于水的狀態，被強制迅浮于水面，從而獲得固液分離。
在成份復雜的高難度廢水處理的工藝組合時，氣浮處理同時還伴附著曝氣現象，降低了表面活性和有機濃度，使耗氧量大為降低，促進了廢水的進一步凈化，為下級處理提供了有利于達標的水質。
氣浮設備主要優點：
氣浮設備與一般沉淀相比，氣浮凈水具有以下優點：
1、單位面積產水量提高4~5倍，占地面積可減少70%。
2、水在凈化中的停留時間可縮短80%，排渣方便，渣體含水率低，其體積僅為沉淀池的1/4。
3、混凝劑投加量可減少30%，可按工業生產情況隨意開停，管理方便。與同類產品相比，本產品具有以下優點：
A.耗電率低，處理每噸水耗電0.1kw/h(以100T/h為例)，操作簡便，易于進一步自動化。
B.運行穩定，氣浮性能好，捕捉能力強，進一步提高了凈化效果，LSQF取消了空壓機和貯氣系統，消除了噪音。
C.利用回流泵的自身壓力便可工作，根據不同水質情況，隨時在0.35~0.45Mpa壓力內可任意調出所需的不同氣水比。（圖/文www.wxwoma.com)
中譯英：
Our company is the production, sales, maintenance of air flotation equipment for the whole company, the development of the company technical force is constantly in recent years, technology innovation and production, products are sold throughout the country, by the customer the consistent high praise, let everyone know about the process of floatation equipment:
The working principle of air bearing equipment are under pressure (0.35~0.45Mpa) the amount of air and water to form saturated solution to gas carrier in the saturator, the release sudden decompression and obtain a large number of fine bubbles, rapid adhesion to the flow of water particles, emulsified oil, bath and the floc flocculation reaction, cause floc proportion less than water, be forced to fast floating on the water surface, so as to obtain the solid liquid separation.
In the high difficulty wastewater treatment process combined with complicated ingredients, air flotation treatment also with attached aeration phenomenon, reduces the surface activity and organic concentration, the oxygen consumption is reduced greatly, promote the further purification of waste water is lower, provides necessary to meet water quality.
The main advantages of flotation equipment:
Flotation equipment compared with the general precipitation, flotation water has the following advantages:
1, the water yield per unit area increased by 4~5 times, the area can be reduced by 70%.
The residence time of water in the purification of the 2, can be shortened by 80%, the slag slag discharge are convenient, low moisture content, the volume of only sedimentation tank 1/4.
3, coagulant dosage can be reduced by 30%, according to industrial production at the stop, convenient management. Compared with similar products, the product has the following advantages:
A. low power consumption, the power consumption per ton of water treatment 0.1kw/h (in the case of 100T/h), simple operation, easy to automation.
B. stable operation, good performance of flotation, capture ability, and further improve the purification effect, LSQF cancelled the air compressor and the air storage system, eliminate the noise.
C. uses the reflux pump pressure can work, according to the different water quality, at any time in the 0.35~0.45Mpa pressure can be arbitrary V required different gas water ratio.